Here's some of the equipment you can us to create your own geothermal heat pump. And you'll need a shovel.
Henry Gifford is a man who designs mechanical systems for very energy efficient, comfortable, and affordable apartment buildings in New York City, along with his partner, architect Chris Benedict. In a recent article in Fine Homebuilding, Henry explained how geothermal heat pumps work in a way that I will always remember. I paraphrase:
Dig a hole in the ground. Put some buckets of water in the hole. If you are deep enough below ground, the temperature of the water in the buckets, after a while, will be about 550F. Take the bucket into your house and put it in your refrigerator. The fridge will cool the water down to say 500F, and the heat produced in the coils behind the refrigerator will add some heat to your house. Voila! You’ve created a geothermal heat pump.
Notice that the heat produced is not free. It takes electricity to run the refrigerator. And if you don’t want to spend your days hauling water in buckets from the hole in the ground to your refrigerator, you’ll want to install a water pump, which uses more electricity.
The very best residential geothermal heat pump system, according to Henry, has a coefficient of performance (COP) of about 3. This means that for every 2 watts of energy the system pulls from the ground, you have to provide only 1 watt of electricity. You get 3 watts out for 1 watt in. But a typical system has a COP of about 2.